Flame Detection Sensor×セキュリティハウス - List of Manufacturers, Suppliers, Companies and Products

Flame Detection Sensor Product List

1～4 item / All 4 items

Displayed results
Flame Sensor White Indoor Use FS-2000(W)

Flame Sensor White Indoor Use FS-2000(W)

Instantly catch a 7cm flame 10 meters away! Perfect for coordination with the controller. Comes with an easy-to-install area adjustment feature!

■Instant Flame Detection The flame sensor "FS-2000" detects ultraviolet rays contained in flames, allowing it to activate the moment a small flame appears and output an alarm before a fire occurs. ■Area Adjustment Function The sensor head can be adjusted vertically in four stages (30°), enabling the setting of any desired detection area. ■Alarm Memory Function Even when multiple sensors are installed, it is possible to identify which sensor has output an alarm. The memory indicator on the sensor body blinks for 3 minutes and remains lit for 47 minutes after an alarm is triggered. ■System Upgrade Capability When a flame is detected, the built-in buzzer sounds, and an external output (non-voltage relay contact) can be accessed, allowing connection to remote disaster prevention controllers. ■Timer-Based Operation Setting Function The alarm will only activate if the flame (ultraviolet) persists for longer than the set timer duration. The detection timer can be selected from four stages based on usage conditions: 1 second, 3 seconds, 6 seconds, or 15 seconds. Easy settings can be made using the mode selector on the back of the unit.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame Sensor Brown UV Detection Method FS-2000(B)

Flame Sensor Brown UV Detection Method FS-2000(B)

Instantly catch a 7cm flame 10 meters away! Perfect for coordination with the controller. Comes with an easy-to-install area adjustment feature!

■Instant Flame Detection The flame sensor "FS-2000" detects ultraviolet light contained in flames, allowing it to activate the moment a small flame appears and issue a warning before a fire occurs. ■Area Adjustment Function The sensor head can be adjusted vertically in four stages (30°), enabling the setting of any desired detection area. ■Alarm Memory Function Even when multiple sensors are installed, it is possible to identify which sensor has issued an alarm. The memory indicator on the sensor body blinks for 3 minutes and remains lit for 47 minutes after an alarm is triggered. ■System Upgrade Capability When a flame is detected, the built-in buzzer sounds, and an external output (non-voltage relay contact) can be accessed, allowing connection to remote fire prevention controllers. ■Timer-Based Operation Setting Function The alarm will only activate if the set timer duration of flame (ultraviolet) persists. The detection timer can be selected from four stages according to usage conditions: 〈1 second, 3 seconds, 6 seconds, 15 seconds〉 It can be easily set using the mode selector on the back of the unit.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame Sensor Brown UV Detection Method FS-3100(B)

Flame Sensor Brown UV Detection Method FS-3100(B)

A highly sensitive sensor that catches even small flames. It can not only detect fires but also provide warnings for no smoking and fire hazard areas.

■Instantly catches flames of 7 cm from 10 m away It sensitively detects the ultraviolet rays contained in flames, ensuring that even small flames are caught without fail, and outputs an alarm before a fire occurs. ■Simultaneous output with alarm sound In addition to voice and alarm sounds, external alarms can be output from the alarm output terminal simultaneously. ■Messages tailored to the application You can choose from three types: two types of voice messages and one alarm sound. ●No Smoking Notification: “(Beep) This is a no smoking area. Please refrain from smoking.” ●No Open Flames Notification: “(Beep) Open flames are prohibited here. The use of open flames outside designated areas is strictly prohibited.” ●Alarm Sound: “(Beep beep beep...)” ■Detection sensitivity and detection timer Ultraviolet rays may be emitted from lighting and some electronic devices even indoors or in hallways. The flame sensor detects ultraviolet rays sensitively, allowing for adjustments to the detection operation settings according to the environment and target to ensure stable operation. - Detection sensitivity: The strength of ultraviolet rays required for detection operation can be switched. (2 levels: H and L)

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flame Sensor Brown FS-1000(B)

Flame Sensor Brown FS-1000(B)

A flame sensor that instantly catches a 7cm flame at a distance of 10m!

■Instant Flame Detection The flame sensor "FS-1000" detects ultraviolet light contained in flames, allowing it to activate the moment a small flame appears and output an alarm before a fire occurs. ■Adoption of Dual Power Supply System The power supply adopts a dual power supply system with an external power source (DC 9V to 30V) and batteries (two AA alkaline batteries), allowing selection based on application and installation location. ●When using batteries, it has a built-in notification function that alerts you to low battery through a buzzer sound and indicator light to prevent operation from stopping due to battery depletion. ■System Upgrade Capability When a flame is detected, the built-in buzzer sounds, and an external output (NPN open collector output) can be accessed, allowing connection to remote disaster prevention controllers. Additionally, when using an external power supply, it can also be used as a powered output corresponding to the power input. (DC 30V, 50mA or less) <Usage Precautions> ●The batteries included with this product are test batteries, so they may expire before the specified usage time is reached. Please replace the test batteries with new ones as soon as possible.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.